产品名称：Portable Calibrator and Precision Manometer (FCO560) 便携式校准器和精密压力计

Key Features

l  Differential pressure measurement down to 0.01 Pa.

l  Automatic differential pressure generator

l  Measure: Differential pressure, flow, temperature & pressure

l  Data-logging facility with USB and RS232C output

l  Detailed and easily-readable graphical display

Used extensively in manufacturing as well as educational and research establishments around the world, the FCO560 is a multi-function low differential pressure instrument with two modes of operation. Calibration mode fulfils the calibration requirements for low differential pressure transmitters, transducers, pressure switches and flow devices. Measurement mode provides a versatile precision micro-manometer that may be combined with laminar flow elements or pitot tubes for measurement of velocity, volumetric flow and mass flow.

l  差压测量低至0.01 Pa。

l  自动差压发生器

l  测量：压差，流量，温度和压力

l  带USB和RS232C输出的数据记录功能

l  详细且易于阅读的图形显示

FCO560广泛应用于世界各地的制造业以及教育和研究机构，是一种多功能低压差仪器，具有两种操作模式。校准模式满足低压差变送器，传感器，压力开关和流量设备的校准要求。测量模式提供了多功能精密微压力计，可与层流元件或皮托管结合使用，用于测量速度，体积流量和质量流量。

Pressure & Flow Calibrator

In calibration mode the FCO560's multiple sensor configurations allow different external references to be used quickly and simply. When combined with laminar flow elements, the FCO560 may be used as a flow calibrator covering flows from less than 1 ml/min to over 30000 l/min. An external pressure sensor may also be used as a reference for calibrating pressures much higher than the FCO560’s differential pressure range.

When used for site calibrations, the FCO560 may be preconfigured with information for up to 99 different instruments to be calibrated. For bench use, these configurations are useful for rapidly changing between commonly used setups.

Additional features:

·             Pressure control stability <0.003 % FS

·             Simultaneous display of applied pressure/flow and EUT values

·             Voltage and current inputs for EUT signal

·             4-20mA inputs for external temperature and pressure transducers

·             PT100 temperature sensor input

·             Internal absolute pressure sensor

·             Battery powered for portable calibration

压力和流量校准器

在校准模式下，FCO560的多种传感器配置允许快速简单地使用不同的外部参考。当与层流元件结合使用时，FCO560可用作流量校准器，覆盖流量从小于1毫升/分钟到超过30000升/分钟。外部压力传感器也可用作校准压力的参考，远高于FCO560的压差范围。

当用于现场校准时，FCO560可以预先配置有多达99种不同仪器的信息进行校准。对于工作台使用，这些配置对于在常用设置之间快速切换非常有用。

附加功能：

•压力控制稳定性<0.003％FS

•同时显示施加的压力/流量和EUT值

•EUT信号的电压和电流输入

•4-20mA输入，用于外部温度和压力传感器

•PT100温度传感器输入

•内部绝对压力传感器

•电池供电，便于校准

Precision Manometer

The FCO560 is a versatile and highly-accurate flow and pressure measurement device, with an accuracy of greater than 0.1% of reading at pressures down to 1 Pa. The instrument is widely used in a variety of applications, such as fan manufacture and wind tunnel operation, and is able to automatically compensate for temperature and local pressure variations.

Additional features:

·             Atmospheric pressure compensation with internal sensor, external sensor, or preconfigured constant value

·             Flow readings as volume flow, mass flow, velocity, or power

·             Extensive list of pre-configured gases, as well as customisable density setting

·             Graphical output showing peak flow and trends

精密压力计

FCO560是一种多功能，高精度的流量和压力测量装置，在压力低至1 Pa时精度大于读数的0.1％。该仪器广泛应用于各种应用，如风机制造和风洞操作，并能够自动补偿温度和局部压力变化。

附加功能：

•内部传感器，外部传感器或预配置恒定值的大气压力补偿

•流量读数，如体积流量，质量流量，速度或功率

•广泛的预配置气体列表，以及可定制的密度设置

•图形输出显示峰值流量和趋势

上一篇:Single point Pitot Static Tube (FCO65) 单点皮托静压管（FCO65)

下一篇:Dual Flow and Pressure Checker (FCS523) 双流量和压力检测器