产品名称：Case Integrity/Combustion Soundness Tester (FCS510) 案例完整性/燃烧完好性测试仪

Key Features

l  Derivative of our proven Production Line Flow Meter (FCO752)

l  Built-in automatic pressure control

l  Direct correlation to harmonised standards

l  Product specific parameters for optimum test set-up

l  Case and combustion testing in a single instrument

l 我们成熟的生产线流量计（FCO752）的衍生产品

l  内置自动压力控制

l  与统一标准直接相关

l  产品特定参数，以实现最佳测试设置

l  单个仪器中的壳体和燃烧测试

The FCS510, derived from our proven FCO752 instrument is a unit which is specifically designed to comply with harmonised standards for the testing of Gas/Oil based Boiler systems. Benefitting from all of the standard features built into the FCO752, the FCS510 has automatic pressure control with variant specific optimisations allowing the test for each product type to run at maximum efficiency.

FCS510源自我们经过验证的FCO752仪器，是专门设计用于符合基于气/油锅炉系统测试的统一标准的装置。FCS510具有FCO752内置的所有标准功能，具有自动压力控制和特定的变型优化，允许每种产品类型的测试以最高效率运行。

Case Integrity testing is carried out by introducing air into the flue outlet at a specific and regulated pressure and the resultant flow of air must be less than a specified limit dependant on the internal volume of the device. Missing or damaged case seals will result in excessive air flow and a fail result from the test. Correctly fitted and complete seals will restrict the air flow to below the specified limit and give a pass result.

通过在特定和调节的压力下将空气引入烟道出口进行壳体完整性测试，并且所得到的空气流量必须小于取决于装置内部容积的指定极限。壳体密封件丢失或损坏将导致过多的空气流动并且测试失败。正确安装和完整的密封将限制空气流量低于规定的限制并给出通过结果。

The FCS510 has 300 product and 300 test memory capacities which allows variant specific tests to be programmed for each model in your range. The built in barcode reader support and ability to store result data provides complete traceability against individually serialised products. The barcode reader input can be programmed by the user to demand product selection, serial number and even User ID before commencing a test. Combustion soundness testing is typically conducted using the same principles as the case integrity but at a higher pressure, not a problem for the FCS510 with its automatic pressure regulator and test specific rate control.

FCS510具有300个产品和300个测试存储器容量，允许为您的范围内的每个型号编程变体特定测试。内置的条形码阅读器支持和存储结果数据的能力提供了针对单个序列化产品的完全可追溯性。在开始测试之前，用户可以对条形码阅读器输入进行编程，以要求产品选择，序列号甚至用户ID。燃烧完好性测试通常使用与壳体完整性相同的原理进行，但压力较高，对于FCS510的自动压力调节器和测试特定速率控制而言不是问题

上一篇:Valve Control Box (FCS539) 阀控箱（FCS539）

下一篇:Multi-Channel Sequence Box (FCS456) 多通道序列盒（FCS456）