产品名称：Multi-Channel Sequence Box (FCS456) 多通道序列盒（FCS456）

Key Features

l  Available in 2,4,6,or 8 Channel variants

l  Individual Pass/Fail indication per channel

l  Individual Active Channel indication

l  Replicator Pass/Fail outputs for interface to external control system

l  Complete with interface cables to FCO750/FCO770 Leak Detector

l 提供2,4,6或8通道型号

l  每个频道的单独通过/失败指示

l  个人活动频道指示

l  复制器通过/失败输出，用于与外部控制系统的接口

l  配备FCO750 / FCO770检漏仪接口电缆

The FCS456 model provides a successful answer to the common question of “can I test more than 1 at a time?”. In modern manufacturing where productivity and efficiency are key to the success of any business, the FCS456 brings an opportunity to dramatically improve throughput efficiency without compromise to the integrity of 100% leak testing of similar components or assemblies. The popular method of grouping parts together for leak test brings high levels of risk and uncertainty where there is no way of segregating Pass/Fail parts or even knowing which of the group may have caused the Fail result.

FCS456模型成功解答了“我可以一次测试多于1个？”的常见问题。在现代制造业中，生产力和效率是任何企业成功的关键，FCS456为大幅提高生产效率提供了机会，同时不会影响类似组件或组件100％泄漏测试的完整性。将零件分组在一起进行泄漏测试的流行方法会带来高风险和不确定性，因为无法分离通过/失败部件，甚至无法知道哪个组可能导致失败结果。

The FCS456 has built in control for parallel Filling of the test group but most importantly, individual Stabilisation and Measurement phases. This combined with individual Pass/Fail indication eliminates the risk and provides result per part.Linked to the FCO750 or FCO770 Leak Detection instrument, the parameters can be tuned and set to optimum whether you are testing identical groups of parts or a collection of similar components. The only criteria is that the Test Pressure is the same for all in the group.

FCS456内置了对并行填充测试组的控制，但最重要的是，单独的稳定和测量阶段。这与单独的通过/失败指示相结合，消除了风险并提供了每个部件的结果。连接到FCO750或FCO770泄漏检测仪器，无论您是测试相同的零件组还是一组类似组件，都可以调整参数并将其设置为最佳值。。唯一的标准是测试压力对于组中的所有人都是相同的。

Virtually any item which lends itself to leak testing at positive or vacuum pressure can be tested with greatly reduced cycle time when grouped together and tested using the FCS456. 

事实上，任何适合在正压或真空压力下进行泄漏测试的产品都可以在组合在一起并使用FCS456进行测试时大大缩短循环时间

上一篇:Case Integrity/Combustion Soundness Tester (FCS510) 案例完整性/燃烧完好性测试仪

下一篇:Pressure Relief Valve Tester (FCO750F) 泄压阀测试仪（FCO750F）